/ / Setting VLAN dan Router

Kamis, 16 November 2017

Setting VLAN dan Router

Setting VLAN dan Router


Switch 1

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 10
Switch(config-vlan)#name erna
Switch(config-vlan)#exit
Switch(config)#vlan 20
Switch(config-vlan)#name lala
Switch(config-vlan)#exit
Switch(config)#int fa0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 10
Switch(config-if)#exit
Switch(config)#int fa0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#int fa0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 20
Switch(config-if)#exit
Switch(config)#


Switch 2
Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#vlan 30
Switch(config-vlan)#name eko
Switch(config-vlan)#exit
Switch(config)#vlan 40
Switch(config-vlan)#name heru
Switch(config-vlan)#exit
Switch(config)#
Switch(config)#int fa0/2
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa0/1
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 30
Switch(config-if)#exit
Switch(config)#int fa0/4
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
Switch(config)#int fa0/3
Switch(config-if)#switchport mode access
Switch(config-if)#switchport access vlan 40
Switch(config-if)#exit
Router 1
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.10.10 255.255.255.0
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.5.5 255.255.255.128
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fa0/0.30
Router(config-subif)#encapsulation dot1Q 30
Router(config-subif)#ip address 192.168.30.36 255.255.255.240
Router(config-subif)#exit
Router(config)#int fa0/0.40
Router(config-subif)#encapsulation dot1Q 40
Router(config-subif)#ip address 192.168.40.52 255.255.255.240
Router(config-subif)#exit
Router(config)#
Router 2
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.20.129 255.255.255.192
Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.5.6 255.255.255.128
Router(config-if)#int fa0/0
Router(config-if)#ip add 192.168.20.129 255.255.255.192
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fa0/1
Router(config-if)#ip add 192.168.5.6 255.255.255.128
Router(config-if)#no shut
Router(config-if)#exit
Router(config)#int fa0/1.10
Router(config-subif)#encapsulation dot1Q 10
Router(config-subif)#ip add 192.168.10.35 255.255.255.224
Router(config-subif)#exit
Router(config)#int fa0/1.20
Router(config-subif)#encapsulation dot1Q 20
Router(config-subif)#ip add 192.168.20.67 255.255.255.224
Router(config-subif)#exit
Router(config)#

Switch 3

Switch>en
Switch#vlan database
Switch(vlan)#vlan 10 name erna
VLAN 10 added:
Name: erna
Switch(vlan)#exit
APPLY completed.
Exiting....
Switch#vlan database
Switch(vlan)#vlan 20 name lala
VLAN 20 added:
Name: lala
Switch(vlan)#exit
APPLY completed.
Exiting....

TRUNK
Router 1
Switch>en
Switch#conf t
Switch(config)#interface fastEthernet 0/5
Switch(config-if)#switchport mode trunk

Router 2
Switch>en
Switch#conf t
Switch(config)#int fastEthernet 0/5
Switch(config-if)#switchport mode trunk

Router 3
Switch>en
Switch#conf t
Switch(config)#int fastEthernet 0/3
Switch(config-if)#switchport mode trunk
IP ROUTE
Router 1

Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 192.168.20.128 255.255.255.192 192.168.5.6
Router(config)#ip route 192.168.20.64 255.255.255.224 192.168.5.6
Router(config)#ip route 192.168.10.32 255.255.255.224 192.168.5.6
Router(config)#
Router 2
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#ip route 192.168.10.0 255.255.255.0 192.168.5.5
Router(config)#ip route 192.168.40.48 255.255.255.240 192.168.5.5
Router(config)#ip route 192.168.30.32 255.255.255.240 192.168.5.5
Router(config)#



Komentar

Related Posts

Setting VLAN dan Router
4/ 5
Oleh

Langganan: Posting Komentar (Atom)